• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.
  • Welcome to Life In The Wilderness

    You are currently viewing the site as a guest and some content may not be available to you.

    Registration is quick and easy and will give you full access to the site and allow you to ask questions or make comments and join in on the conversation. If you would like to join then please Register
DPB-1 Handmade Knife

DPB-1 Handmade Knife

The site was kindly offered a handmade knife by professional knife maker: Mark Hill aka hillbill on the forum and I was kindly tasked with doing the review.

This was one review I'd been looking forward to for some time as I have seen marks work first hand before, I couldn't wait to get my hands on one and put it through its paces properly.

dpb1-1.jpg


My bag was packed and it was time to head off into the woods to put the DPB-1 (Drop Point Blade) to the test.

Firstly lets start off with the specs:
  • 3mm 01 tool steel, Yew scales over black liners
  • Brass pins / tubes
  • 3.5" blade
  • 8" total length
  • Sheath from 3.5mm natural veg tanned leather
Sounds like a sexy knife doesn't it? Well it sure is, have a look

dpb1-2.jpg
dpb1-4.jpg
dpb1-5.jpg
dpb1-3.jpg


As soon as I had found my spot, the knife got put to work. Now obviously a sharp knife cuts well, but I must emphasize just how well the DPB-1 cuts. It's like a hot knife through butter, Mark's got the grind bang on. It cuts deep and easy when your doing heavier work, but fine and thin when your doing more intricate applications.

It's hard to find a knife that excels in both categories of use and just to demonstrate just how sharp it was, I "purposely" (okay maybe not so purposely) slipped and nicked my thumb.

I used several different techniques of cutting to see how the knife "handled"; after all it's important that the knife is comfortable in the hand. If it isn't, you wont get on with it for very long. I found the knife perfectly weighted and it sat in the hand nicely.

I spent a long time looking the DPB-1 over very closely, It's immaculate and Marks workmanship is spot on. The knife is point perfect and finished to as high a standard as I have ever seen. The grain on the yew is stunning and oiled to just the right colour. I would have absolutely no qualms recommending him and his work.

The thing with a handmade knife as opposed to buying a mass produced product is that you can literally feel the work that has gone into it. You really do have no choice but to appreciate the knife and the quality of it. If the DPB-1 doesn't do it for you, he has a whole range of different styles which he offers, and as I said, if none of his "standard" knives take your fancy, then you can get a commission on something that does.

The leather sheath that came with the knife is bang on too, the stitching is perfect and the knife fits snugly into it. The colour came out great also.

dpb1-6.jpg
dpb1-7.jpg
dpb1-8.jpg


Only one small imperfection, and that's a bit of discolouration on the side of the sheath.

This is pretty much un-noticeable though, I just like to be thorough.

dpb1-9.jpg


If you haven't got a Mark Hill knife, get one! His work is top quality, you're sure to find one from his range that suits you, and if not get him to make you one from scratch (after all, the knife is more personal to you this way), using this knife put a smile on my face.

It has secured my opinion that I need to save up and get Mark to make me a knife to my specs. The knife got used pretty heavily this weekend and it's still as sharp as when I received it, it holds it's edge really well. It may have even changed my preference from stainless to carbon steel!

Many thanks to Mark for donating the knife for review, you can visit his site at the link below:

Security Check Required
Likes: Matt
Author
elliott92
First release
Last update
Rating
5.00 star(s) 1 ratings

Latest reviews

ive had this knife for 5yrs now and its the only knife i,ll ever need ...