Survival rifle

[Prime]

No mate, back in the UK all those years ago pellets were inexpensive, & I have used this rifle very little over here. I have never bothered to get a mould for .22 slugs, & probably won't.
Keith.

Well if you ever want me to source and research one I can ship it over.

 

[Keith]

Well if you ever want me to source and research one I can ship it over.

Very kind of you Prime. I will think on it. If you come up with a price it would interesting to know if it is worth my while.
Thanks again.
Regards, Keith.

 

[Prime]

Keith , for your attention mucker.

https://www.airgunpelletmaker.com/

 

[Keith]

Keith , for your attention mucker.

https://www.airgunpelletmaker.com/

Many thanks, now at least I know what is available & the cost. Too expensive, not that I can't afford it, but I don't think it is worth it. If I decide to make my own pellets, I think I will make my own mould.
Regards, Keith.

 

[38thfoot]

if you do some internet searching there are some tutorials in how to make your own using a pair of pliers as the mould; generally they would be some form of solid cylinder with a domed head so not as accurate as properly waisted diablo pellets but probably good enough.

38

 

[Ystranc]

The pellets need to be swaged and trimmed after they've been cast to make them fit the bore tightly. I've not seen any moulds that will produce waisted pellets, I would be interested to find out if you know of any.